website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 1 d4ub05 thru d4ub100 single phase 4.0 amps.glass p assivated bridge rectifiers voltage range 50 to 1000 volts current 4.0 amperes d3k dimensions in inches and (millim eters) features ideal for printed circuit board reliable low cost construction technique results in inexpensive product high temperature soldering guaranteed: 250 / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ul recognized file number: e347214 mechanical data case: molded plastic lead: solder plated polarity: as marked maximum ratings and elec trical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inducti ve load. for capacitive load, derate current by 20% type number d4ub 05 d4ub 10 d4ub 20 d4ub 40 d4ub 60 d4ub 80 d4ub 100 units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current @t c =138 i (av) 4.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 135 a maximum instantaneous forward voltage @ 2.0a v f 1.00 v maximum dc reverse current @ t a =25 rated dc blocking voltage per leg t a = 125 i r 10 500 a typical thermal resistance (note 1) (note 2) (note 3) r ja r jl r jc 55 15 1.5 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 note 1. junction to ambient,without heatsink. 2. junction to lead,without heatsink. 3. junction to case,with heatsink.
website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 2 d4ub05 thru d4ub100 rating and characteristic curves d4ub05 thru d4ub100 fig. 1-maximum nono-repetitive forward surge current per bridge elelment number of cycles at 60hz case temperature.( ) fig. 3-typical instantaneous forward characteristics per bridge element fig. 4-typical reverse characteristics per bridge element instantaneous forward voltage.(v) percent of rated peak reverse voltage.(%) fig. 2-maximum forward current derating curve note: specifications are subject to change without notice.
|
